Find Dust Collector Of Dryer, The Price Of The Dryer Collector, Special Collector For Dryer on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Bonding Machine Cleaning Powder > Dedusting equipment for drying machine

Dedusting equipment for drying machine

  • Dedusting equipment for drying machine
  • Dedusting equipment for drying machine
  • Dedusting equipment for drying machine
  • Dedusting equipment for drying machine

Dedusting equipment for drying machine

    Payment Type: L/C,T/T
    Terms of Trade: FOB,CIF
    Delivery Time: 30 Days
    Packaging: bag
    Brand: youjian
    Transportation: Ocean,Land,Air
    Place of Origin: Botou city, hebei province, China
    Port: Xingang,China

Basic Info

Model No.: 96-9

Product Description

The deduster of the dryer adopts high pressure pulsing ash cleaning method, which has good effect on the waste gas treatment of the dryer, vertical dryer, cement, mineral powder, gypsum and other industries. As the dryer uses coal to provide heat source, the exhaust gas contains a certain amount of sulfur dioxide, which has a strong corrosivity. According to this characteristic, all the internal dust remover uses anticorrosion treatment. Filter bag is used for high temperature resistant and corrosion resistant fluorometh filter. The framework is made of stainless steel or silicone. Besides, the insulation layer is made outside the equipment so as not to expose the smoke to corrode the shell and block the filter bag. The service life of the dust collector is prolonged. The box type off-line pulse ash cleaning system can repair the dust remover online without stopping. The equipment is fully automated and has no need for personal supervision. The emission concentration is far below the national standard. The structure and working principle of the dryer dust collector and the coal drier
The coal slurry drier system mainly consists of heat source system, feeding system, conveying system, drying system, dust removal system, and electrical control system. The slime itself has high moisture and high bonding property. In the process of drying, the wet slime enters the slime through the belt conveyor. After the fast scattered lump of slime into the negative pressure dryer, the slime is divided into the following working areas: the first is the guide area, the wet slime enters this area and evaporates rapidly after the high temperature negative pressure hot air contact. When the water is measured, the slime is transferred to the next working area under the copying plate of the big guide angle. Two is the cleaning area. The wet slime is copied from the sheet to form the state of the curtain, and the wall phenomenon is easily formed when the material falls down. In this area, the cleaning device can quickly clean up the sticky because of the equipment design. In the process of this process, the cleaning device also plays a crushing role in the mass pellets of the material, thus increasing the heat transfer area and improving the efficiency of heat and mass transfer. The slime dryer increases the drying rate; three is the sloping uplink area, which is a low temperature drying area, and the slime has low water in this area. Loose state, this area has no bond phenomenon, after heat exchange finished product reached the required water requirements, the movement entered the final discharge area; four is the discharge area, the drying main engine cylinder in this area does not set the sheet, material in this area rolling to the discharge mouth, complete the whole drying process.
The dryer dust collector is designed for the exhaust gas produced by the dryer to the slag, pulverized coal, clay, and desulphurization gypsum. The flue gas produced in the dryer is characterized by high temperature, high corrosion, easy to dew and so on. The dust remover is specially carried out in the process of making the dust collector, and the skeleton is treated with organosilicon and filter bag. Oil and acid resistant and high temperature resistant filter materials are installed and external thermal insulation is installed. The use of impulse ash removal has large air handling capacity and high automation level.
The fluctuation range of the flue gas temperature, dust concentration and moisture content of the dryer is large, especially the high temperature of the smoke dew point. One dryer often dries a variety of materials, the properties of the dust change frequently, the flue gas is corrosive, and the drying machine is stopped when the dryer is opened. These all bring great difficulties to the dust removal of the dryer, and the dryer is very difficult to remove. Dust has become a problem of dust removal in cement plant. The special pulse bag filter used by our company has successfully solved the problem of dust control. It uses water repellent and dedusting bag, tube type spray blowing technology, not only has the advantages of strong dust cleaning ability, high dust removal efficiency and low emission concentration, but also has the advantages of small area and large air volume per unit area. The dust remover adopts a large number of new technologies and high quality components. The degree of stress, reliability and automation can be greatly improved, which can guarantee the operation of the equipment for a long time. The discharge concentration of the dedusting equipment is lower than that stipulated in the state, and it is the first choice for the dust control of the dryer.

Botou Youjian Environmental Protection Equipment Co. LTD.

 Botou youjian environmental protection equipment co., LTD. is a professional company with the development, design, production, installation and service of environmental engineering and environmental protection equipment. Company is located in the coronal has the reputation of "hometown of pears" botou city, hebei province, the company in the east near the beijing-shanghai railway, beijing-shanghai high-speed and 104 national highway, 106 state road and west stone yellow high-speed, the geographical position is superior, the transportation is very convenient. Our company adheres to the tenet of quality first, users first, now reside in the domestic high grade, high quality, high performance, environmental protection equipment technology development and production base, production volume in the national top Xu in the industry. Main technical products are: cloth bag dust collector, single filter, cyclone, and electrostatic precipitator and wet dust collector, dust remover, the filter cartridge dust collector, injection machine and other kinds of environmental pollution control technology and equipment, dust bag, dust skeleton, electromagnetic pulse valve, discharge feeder and other accessories, products are widely used in metallurgy, electric power, building materials, chemical industry, etc. Company always adheres to the philosophy of science and technology innovation, work closely with scientific research units and the major design institute, has developed 30 many kinds of environmental protection technology and products, more than 20 projects to undertake all kinds of large-scale environmental engineering, the products sell well in more than 30 provinces and cities and exported to the United States, India, Vietnam and other countries and regions, has won the broad masses of users and design units. Among them, "pulse bag filter" and "high voltage electrostatic precipitator" were first approved by the provincial and national environmental protection bureau, and won the provincial and advanced environmental science and technology awards. We will take this as a new starting point and continue to work on the development and development of environmental engineering and environmental protection products. We will continue to maintain the advantages of high technology level, high quality of products and good reputation of enterprises. Establish the correct scientific outlook on development, constantly improve the overall quality of the company, enhance the market competitiveness, and push the company to a new level. In the development process, the company adheres to the combination of scientific research, design and production services, and takes the market with new mechanism, new thinking and new technology, and has achieved remarkable results. Company will continue to cooperate with the social from all walks of life ability, and sincerely hope friends from all walks of life will, as always support and concern the development of our company, for the development of the construction of a harmonious society, for the environmental protection enterprise strive brilliant tomorrow! Enterprise tenet: the lowest price but the best quality!

Company Info

  • Company Name: Botou Youjian Environmental Protection Equipment Co. LTD.
  • Representative: douliangliang
  • Product/Service: Dust Collecter , Industrial Dust Collector , Dust Collector Fittings , Cyclone Dust Collector , Desulfurization Collector , Filter Press
  • Capital (Million US $): 1000000RMB
  • Year Established: 2014
  • Total Annual Sales Volume (Million US $): US$10 Million - US$50 Million
  • Export Percentage: 11% - 20%
  • Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
  • No. of Production Lines: 3
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: 5 -10 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 10,000-30,000 square meters
  • Factory Location: Shiying industrial zone, botou city, hebei province, China
  • Contact Person: Mr. Dou Liangliang
  • Tel: 86-0317-5660622
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters